Rf Coaxial Cable

Product Details:

7/8" Leaky Cable is a type of RF coaxial cable which has gaps or slots in its outer conductor to allow the radio signal to leak into or out of the cable along its entire length so the cable functioning as extended antennas. It is suitable for wireless communication in narrow or long, curvy surroundings, such as mining, in buildings, tunnels, subways, high-speed trains, etc.

Additional Information:

• Production Capacity: 1 LAKH METRE
• Delivery Time: 2-3 DAYS AFTER ORDER
• Packaging Details: BUNDLED DRUMS

Product Details:

The RG 213 coaxial cable is used for installations for radio signal transmission being suitable for larger distances.The polyethylene of low dielectric constant enables high-speed signal diffusion, and good flexibility at installation.This cable should be installed only in  indoor applications, exceptionally outdoor, only under protection against sunlight.

Product Details:

RG142 is a high-temperature coax cable ideal for use in interconnections between telecommunications equipment and is widely used for commercial wireless applications. RG142, also known as RG-C, is a flexible coaxial cable, which means that it is resistant to static build-up and high levels of electromagnetic interference. It is also incredibly durable, as it features a specific, patented, thermo-electric extruded PTFE dielectric. This dielectric can withstand temperatures up to 200 degrees Celsius. The top-quality material in this 50-ohm coaxial cable's construction makes it a great choice. It features a silver-coated coper-clad steel conductor, PTFE insulation, an FEP jacket, and a double shield. However, in order to get the best from RG142 coaxial cable, you need to ensure that you are using the best quality connectors, shielding, and core structures available.

Product Details:

Drop-in replacement for Times Microwave LMR 300/CNT 300

Features
• High-performance coaxial cable with durable Polyethylene jacket
• Jumper Assemblies in Wireless Communications Systems.
• Short Antenna Feeder runs.
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable. 

 Construction
*Conductor Material- Copper Clad Aluminum
*Stranding 1 / 1.78 mm
*Dielectric Foamed Polyethylene (FPE)
*Diameter of Dielectric 4.83 mm
*Screen Material(1) -Bonded Aluminum/Polyester/Aluminium Tape (100%) Screen *Material(2) -Tinned Copper wire Braid (87%)
*Outer Sheath Material -Polyethylene –
*UV Resistant
*Outer Sheath -Color Black

Electrical Characteristics
*Impedance- 50Ω
*Cutoff Frequency DC – 8 GHz
*Velocity of Propagation 83%
*Dielectric Constant 1.56
*Shielding Effectiveness >90 dB
*Withstand Voltage 2.5kV
*Jacket Spark 5.0kV (rms)
*Capacitance 24.5 pF/ft (78.4 pF/m)
*Inductance 0.060 μH/m

Additional Information:

• Production Capacity: 10000
• Delivery Time: 5-7 DAYS AFTER ORDER
• Packaging Details: 500 METRE ROLL

Product Details:

Established in 2012, Signity RF Solutions is one of the distinguished business firm involved in manufacturing, trading, importing and supplying of GPS And GSM Antennas, Radio Frequency Antennas, Patch Antennas, Whip Antennas and many more. We also providing services of Antennas Installation Services. Fabricated with supremacy, these presented products are immensely credited in the industry due to their longer life, perfect designs and durable finish standards.. Valued among our patrons, these products could be acquired from us at pocket-friendly rates. Additionally, to eradicate all the faults present in the consignment, these are well-examined on assorted restrictions of quality before shipment. We import from countries like China and Taiwan.

Product Details:

 Drop-in replacement for Times Microwave LMR 100/CNT 100

Feature
• High-performance coaxial cable with durable Polyethylene jacket
• Jumper Assemblies in Wireless Communications Systems.
• Short Antenna Feeder runs.
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable

Product Details:

Drop-in replacement for Times Microwave LMR 195 Features
• High-performance coaxial cable with durable Polyethylene jacket
• Jumper Assemblies in Wireless Communications Systems.
• Short Antenna Feeder runs.
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable. 

 Construction
*Conductor Material- Solid Bare Copper
*Stranding 1 / 0.94 mm
*Dielectric Foamed Polyethylene (FPE)
*Diameter of Dielectric 2.79mm
*Screen Material(1) Bonded Aluminum Tape(100%) *Screen Material(2) Tinned Copper wire Braid (89%) *Outer Sheath Material Polyethylene – UV Resistant *Outer Sheath Color Black Electrical Characteristics *Impedance 50Ω
*Cutoff Frequency DC – 8 GHz
*Velocity of Propagation 75%
*Dielectric Constant 1.56
*Shielding Effectiveness >90 dB
*Withstand Voltage 1.5kV

Additional Information:

• Production Capacity: 10000
• Delivery Time: 5-7 DAYS AFTER ORDER
• Packaging Details: 500 MTR ROLL

Product Details:

Drop-in replacement for Times Microwave LMR 240 Features • High-performance coaxial cable with durable Polyethylene jacket • Jumper Assemblies in Wireless Communications Systems. • Short Antenna Feeder runs. • Any application (e.g. WLL, GPS, LMR, WLAN, WISP,WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable.
 CONSTRUCTION
*Conductor Material -Solid Bare Copper
*Stranding 1 / 1.12 mm
*Dielectric- Foamed Polyethylene (FPE)
*Diameter of Dielectric- 2.79 mm 2.95mm
*Screen Material(1) -Bonded Aluminum Tape(100%) *Screen Material(2) Tinned Copper wire Braid (89%) *Outer Sheath Material Polyethylene – UV Resistant *Outer Sheath Color- Black

Electrical Characteristics
*Impedance -50Ω
*Cutoff Frequency DC – 8 GHz
*Velocity of Propagation 83%
*Dielectric Constant 1.56
*Shielding Effectiveness >90 dB 

Additional Information:

• Production Capacity: 10000 METRE
• Delivery Time: 5-7 DAYS AFTER ORDER
• Packaging Details: 500 METRE ROLLS

Product Details:

Drop-in replacement for Times Microwave LMR 300 Features
• High-performance coaxial cable with durable Polyethylene jacket
• Jumper Assemblies in Wireless Communications Systems.
• Short Antenna Feeder runs.
• Any application (e.g. WLL, GPS, LMR, WLAN, WISP,WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable.

 Construction
*Conductor Material- Solid Bare Copper
*Stranding 1 / 1.78 mm
*Dielectric- Foamed Polyethylene (FPE)
*Diameter of Dielectric -4.83 mm
*Screen Material(1) -Bonded Aluminum/Polyester/Aluminium Tape (100%)
*Screen Material(2) Tinned Copper wire Braid (87%) *Outer Sheath Material Polyethylene – UV Resistant *Outer Sheath Color Black Electrical Characteristics *Impedance 50Ω
*Cutoff Frequency DC – 8 GHz
*Velocity of Propagation 83%
*Dielectric Constant 1.56
*Shielding Effectiveness >90 dB
*Withstand Voltage 2.5kV
*Jacket Spark 5.0kV (rms)
*Capacitance 24.5 pF/ft (78.4 pF/m)
*Inductance 0.060 μH/m 

Product Details:

DIMENSION / MATERIAL
*Inner conductor Ø 13.00 ±0.10 mm | Ø 0.52 ±0.004 in Smooth copper tube
*Dielectric Ø 32.80 ±0.40 mm | Ø 1.29 ±0.016 in Physically foamed PE
*ZS  Outer conductor Ø 35.80 ±0.30 mm | Ø 1.40 ±0.012 in Ring corrugated Copper *
*Jacket Ø 38.80 ±0.30 mm | Ø 1.07 ±0.012 in PE black
Mechanical Specification
*Minimum Single bending radius Repeated 200 mm | 7.87 in 380 mm | 14.96 in
*Max. tensile force 5900 N | 1326.37
*lbf Crush resistance 2.2 kg/mm | 123.2 lb/in *Recommended clamp spacing 1200 mm | 47 in
*Weight 0.98 kg/m | 0.66 lb/ft

Electrical Specification
*Impedance 50 ??? ±1
*Propagation velocity 88 %
*Capacitance 75 pF/m | 22.87 pF/

Additional Information:

• Production Capacity: 10000 METRE
• Delivery Time: 5-7 DAYS AFTER ORDER
• Packaging Details: 500 MTRE ROLLS